Model: 18-0749
Stock: 72
Premium Base Gasket for Big Bore 750cc cylinders ( 85mm. OD. sleeve size). Stock type stud holes (dowel pins are used). Fits: Big Bore Kit. Chemically treated gasket material makes improved seal...
$20.00
Ex Tax:$18.18
Model: 18-0854
Stock: 98
Base Gasket for Big Bore ( 860cc.) cylinders ( 91mm. OD. sleeve size ). No dowel pins are used on these special large cylinders. 10mm. stud holes. Fits: XS/TX's 1970-84 Special chemically treated gasket material makes improved seal. (no gasket cement to be used on this material)...
$18.00
Ex Tax:$16.36
Model: 18-0750
Stock: 58
Big Bore Headgasket ( 750cc. - 82mm.).
Fits: Our XS #05-0750 Big Bore Kits for 1974-84 447 type engines...
$62.00
Ex Tax:$56.36
Model: 18-0853
Stock: 102
Big Bore (87mm.) Headgasket for extra large cylinders (approx. 860cc.) No dowel pins are used on these special large cylinders. 1972-84 type pattern. 10mm. stud holes. Special high quality gasket material...
$58.50
Ex Tax:$53.18
Model: 18-0871
Stock: 169
Bottom end Copper Sealing Washer Kit - 13 pc.
Fits: All 650's Kit Contains: 6pc.of # 90430-08143-00 ( @ Crankcase Bottom - Nut washers), 2 pc.of #90430-06014 ( @ Oil filter cover screws in clutch case), 3 pc. 90430- 06014 ( @ 3 Clutch case upper front screws), 1 pc. of # 90430-06014 ( @ Tach drive ..
$10.50
Ex Tax:$9.55
Model: 49-0711
Stock: 19
Advance/Breaker Housing Screw & washer Set (6pc.Set) - 3 countersunk flat-head type screws and 3 matching starlock washers. 2 sets required to do both engine housings on each engine.
Fits: All 650's 1970-84..
$12.50
Ex Tax:$11.36
Model: 01-9020
Stock: 837
Camshaft Seals (Pk./2) Special triple lip camshaft Oil Seals. - Made in Japan Fits: All 650's 1970-84..
$28.50
Ex Tax:$25.91
Model: 49-0248
Stock: 44
Tall Chrome Crown Nut Set (6pc. used on bottom of crankcase). 8mm. x M1.25 thread x 19mm. tall
(use 12mm.wrench). Replaces OEM# 90176-08019..
$15.50
Ex Tax:$14.09
Model: 01-9019
Stock: 101
Clutch Pushrod Oil Seal - Made in Japan by original maker. Fits: 1970-84 650's OEM Ref.# 93102-08094/08118 (SD - 8-25-6) Ars Note: The Clutch pushrod seal is a chronic leaker. This seal was made to be replaced when the engine cases are split! It can be replaced without splitting the cases but it is ..
$9.50
Ex Tax:$8.64
Hot
Model: 17-3802
Stock: 154
Copper Drain Plug Crush Gaskets - (1 Pk./2.) Each engine has 2 drain plugs.
Replaces OEM# 256-15353-00..
$8.50
Ex Tax:$7.73
Model: 01-9021
Stock: 210
Countershaft Oil Seal (Front sprocket Seal) - Made in Japan - Fits: 1970-84 650's..
$20.00
Ex Tax:$18.18
Hot
Model: 01-0651
Stock: 60
Brass Cylinder Head Washers - Can replace all cylinder head sealing washers or all Head Nut Washers used on any 650. 22mm. OD x 10.5mm. ID x 4mm. Thick..
$3.80
Ex Tax:$3.45